192.168.7.234

This http://192.168.7.234 address will allow you to access your router admin to make changes to your configurations.

1. You will need to login to your router admin if you want to change your password, conduct router configurations, or change or modify settings. Type in the address into your preferred browser’s URL bar.
2. You need to type in the correct IP address. An error occurs if you type in a wrong one. To avoid using auto-complete, retype the address carefully. This article provides techniques for determining your router’s IP address.
3. Forgotten username and password? Don’t worry; follow tips to get them back. Check out our list containing the default router usernames and passwords if you didn’t change the default username and password.

Forgotten username and password? Don’t worry; follow these tips to get them back. Check out our list containing the default router usernames and passwords if you didn’t change the default username and password.

1. Make sure your router is in connection to your devices with Wi-Fi or Ethernet cable. Cross-check all the router’s lights, such as the internet light, Ethernet light, power light, and Wi-Fi light.
2. If your device is already connected to the router, restart it.
3. You can do this by removing the modem and router plug. Plug them back after a while, one by one. Check after two minutes.
4. When behind firewalls, disable the same. It is possible for the router to have problems accessing the internet because of the firewall settings.
5. 192.168.7.234

The address is  192.168.7.234. Using the wrong address will lead to login problems. If this doesn’t help, reset the router back to factory settings. This can be done by pressing the reset button on the router.

Steps to Configure Router.

1. The first step is to find if the internet connection available is either working or not by connecting the Ethernet cable to the computer directly.
2. The router usually comes with a manual that mentions the default gateway, username, and password. The router should be put in a central location or a higher shelf.
3. The router might take some time to boot. A green light appearing on the router shows that it is ready to use or as indicated by the manual.
4. Connect the router to the internet source by connecting the DSL Modem, ISP gateway cable, or broadband cable to the router’s internet port. The port usually comes in a different color or a noticeable placement.